Jeep recall Problems

  1. uConnect Hacks

    Automakers have been swapping out mechanical parts for electronic control units, setting up in-car wifi networks, and connecting infotainment systems to cloud-based services. So it was only a matter of time before these technologies got hac…

    Continue reading article "uConnect Hacks" Infotainment screen with uConnect loaded
  2. Jeep Vehicles with Recalled Takata Airbags

    Parts supplier, Takata, manufactured defective, shrapnel-hurling airbag inflators that need to be recalled. The issue affects 37 million+ vehicles spread out across 24 brands, making it one of the largest (and most dangerous) recalls in aut…

    Continue reading article "Jeep Vehicles with Recalled Takata Airbags" A crash test dummy about to hit an airbag with the Takata logo superimposed
  3. Jeep TIPM Electrical Problems

    If you've heard of a TIPM, chances are you own a vehicle from Fiat-Chrysler (FCA). Think of it like a command center for all the electrical functions of your car, and in FCA's case a very, very disfunctional one.

    Continue reading article "Jeep TIPM Electrical Problems" A TIPM pulled apart to show complicated electronics
  4. Rear Impact Fire Defect

    Millions of Jeep vehicles have a gas tank that is positioned in such a way that it is highly vulnerable to being punctured during a rear-impact accident. The combination of leaking fuel and sparks caused by collisions can easily set the car…

    Continue reading article "Rear Impact Fire Defect" A Jeep on fire on the side of the road
  5. Jeep e-Shift Design Defect

    FCA's electronic gear shifter is confusing because it violates basic design guidelines for vehicle controls. It has caused numerous rollaways and even deaths. So why did FCA make the switch?…

    Continue reading article "Jeep e-Shift Design Defect" Overhead view of Jeep gear shifter

Related News

There's a lot of news out there, but not all of it matters. We try to boil down it to the most important bits about things that actually help you with your car problem. Interested in getting these stories in an email? Signup for free email alerts over at CarComplaints.com.

  1. Over 34,000 of 4th generation Grand Cherokee SUVs are being recalled because their EcoDiesel's EGR coolers are cracking

    , allowing coolant to leak and greatly increasing the chances of an engine fire.

    Exhaust Gas Recirculation (EGR) systems trap exhaust gases and, as the name implies, recirculate them back into the engine. This helps cut down on Nitrogen Oxide (NOx) being released into the environment. The EGR cooler makes sure those hot exhuast gasses won't melt the engine's air intake by exchanging heat with engine coolant.…

    keep reading article "Grand Cherokee Recalled to Prevent EGR Cooler Leaks From Starting Engine Fires"
  2. Fiat-Chrysler (FCA) is recalling 24,000 Wranglers because the front track bar brackets weren’t welded properly and could separate from the frame.

    Before the bracket completely separates from the frame, a driver may hear noise from the front-end and notice the steering wheel is off-center. In addition, a “Service Electronic Stability Control” message may appear and the stability control light will illuminate.

    The affected Wranglers are all from the 2018-2019 model years, and built between 05/07/2018 and 08/21/2018 at the Toledo assembly plant.

    keep reading article "4th Generation Wrangler Track Bars Weren’t Welded Properly"
  3. Fiat-Chrysler (FCA) is recalling 470,000 cars with active head restraints after an internal investigation revealed there were problems with the occupant restraint control modules that can degrade.

    The investigation came after the National Highway Traffic Safety Administration (NHTSA) inquired about AHR complaints in the 2012 Jeep Liberty SUVs and 2012-2013 Chrysler 200 and Dodge Avenger cars.

    The Liberty was involved in another AHR recall back in 2013.

    keep reading article "2012 Liberty’s Active Head Restraint Recalled"
  4. ZF North America is recalling over 500,000 of its 9-speed transmissions (number 9HP48 or 948TE) because they can suddenly slip into neutral.

    The problem is caused by a terminal crimping issue with 26-way connectors on the sensor cluster harness assemblies.  The company says the star-shaped connector was not properly crimped and the problem wasn't caught at the factory because of a manual setting used for measurements.

    keep reading article "Defective ZF Transmission Sensors Recalled in 505,000 Vehicles"
  5. A transmission defect known to cause a sudden loss of propulsion is being recalled in over 400,000 Fiat-Chrysler (FCA) vehicles.

    [FCA] was examining warranty data and opened an investigation that determined an insufficient crimp in a wire harness could cause a fault code in the solenoid. If that occurs, the vehicle will stop moving, something Chrysler says can temporally be fixed by stopping the vehicle and re-starting the engine.

    keep reading article "FCA Blames Wiring Harness Problem on ZF Transmission’s Sudden Loss of Propulsion"